1.
Welcome
1.1.
Stavros' notes
2.
ArduPilot
2.1.
ArduPilot setup checklist
2.2.
Building ArduPilot
2.3.
Configuring a switch as a relay
2.4.
Reverse thrust
2.5.
TECS tuning calculator
2.6.
Transfer config between craft
2.7.
Tuning the TECS
3.
Drone stuff
3.1.
A simple guide to PID control
3.2.
E6000 hinges
3.3.
FPV frequency chart
3.4.
General RC tips
3.5.
Getting uninverted SBUS on a no-name FrSky-compatible receiver
3.6.
Getting uninverted SBUS/SmartPort on the FrSky XSR receiver
3.7.
INAV tuning tips
3.8.
Miscellaneous
3.9.
Omnibus F4 V3 pinout
3.10.
Omnibus F4 pro servo diode
3.11.
QGroundControl to Mission Planner conversion script
3.12.
Transmitter external module pinout
3.13.
Transportable C1 Chaser
4.
Maker things
4.1.
Battery discharge curves
4.2.
Electronics tips
4.3.
GRBL_ESP32 tips
4.4.
How to properly level your 3D printer
5.
Model build notes
5.1.
Build notes for the FT Mighty Mini Arrow
5.2.
Mini Drak build condensed instructions
6.
Software
6.1.
Monero GUI syncing stuck with Ledger
6.2.
Test and format SD cards
🔎
Maker things
Contents
🔗
Click on a link in the list below to go to that page:
Battery discharge curves
Electronics tips
GRBL_ESP32 tips
How to properly level your 3D printer
<
>