Reverse thrust

To set up reverse thrust (for higher braking when landing, for example), follow the steps below:

  • Set your BLHeli-compatible ESC to β€œReversible soft” and make sure you’re using DShot.
  • Set THR_MIN=-100.
  • Set SERVO_BLH_3DMASK=1 (or whatever channel your motor is on).
  • Set RC9_OPTION=64 for the reversing switch on channel 9 (or whatever channel you want).
  • Set USE_REV_THRUST=0 to disable reverse thrust on all auto modes.

You’re done.

When flipping the switch, throttle will reverse, so your plane will slow down instead of speed up the more you throttle up. Be careful not to stall or otherwise hurt your craft, I don’t recommend going over 20-30% reverse throttle.

Last updated on May 01, 2022. For any questions/feedback, email me at