This is the regex I use with Parachute to transfer between planes only the parameters that are transferrable (ie non-plane-specific):
parachute restore -f '^(ACRO_LOCKING|OSD.*|RC[\d_]+.*|FLTMODE.*|FLIGHT_OPTIONS|FS_.*|RTL_CLIMB_MIN|RTL_RADIUS|THR_PASS_STAB|THR_SLEWRATE|THR_SUPP_MAN|TKOFF_ACCEL_CNT|TKOFF_THR_.*|TKOFF_ALT|TKOFF_DIST|HOME_RESET_ALT|ALT_HOLD_RTL|MIN_GNDSPD_CM|ARMING_RUDDER)$' <backup>
This will transfer things like the OSD settings, flight modes, failsafe options, etc etc, but will leave things like PID tuning alone. Use it to set up a new plane by copying over settings from an older plane.
Last updated on September 16, 2023. For any questions/feedback, email me at firstname.lastname@example.org.