• 1. Welcome
    • 1.1. Stavros' notes
  • 2. Drone stuff
    • 2.1. A simple guide to PID control
    • 2.2. Ardupilot setup checklist
    • 2.3. E6000 hinges
    • 2.4. FPV frequency chart
    • 2.5. General RC tips
    • 2.6. Getting uninverted SBUS on a no-name FrSky-compatible receiver
    • 2.7. Getting uninverted SBUS/SmartPort on the FrSky XSR receiver
    • 2.8. INAV tuning tips
    • 2.9. Miscellaneous
    • 2.10. Omnibus F4 V3 pinout
    • 2.11. Omnibus F4 pro servo diode
    • 2.12. QGroundControl to Mission Planner conversion script
    • 2.13. Transmitter external module pinout
    • 2.14. Transportable C1 Chaser
  • 3. Maker things
    • 3.1. Electronics tips
    • 3.2. GRBL_ESP32 tips
    • 3.3. How to properly level your 3D printer
  • 4. Model build notes
    • 4.1. Build notes for the FT Mighty Mini Arrow
    • 4.2. Mini Drak build condensed instructions
  • 5. Software
    • 5.1. Monero GUI syncing stuck with Ledger
🔎

    Drone stuff

    Contents🔗

    Click on a link in the list below to go to that page:

    1. A simple guide to PID control
    2. Ardupilot setup checklist
    3. E6000 hinges
    4. FPV frequency chart
    5. General RC tips
    6. Getting uninverted SBUS on a no-name FrSky-compatible receiver
    7. Getting uninverted SBUS/SmartPort on the FrSky XSR receiver
    8. INAV tuning tips
    9. Miscellaneous
    10. Omnibus F4 V3 pinout
    11. Omnibus F4 pro servo diode
    12. QGroundControl to Mission Planner conversion script
    13. Transmitter external module pinout
    14. Transportable C1 Chaser
    <
    >